Dongguan HOWFINE Electronic Technology Co., Ltd.
To the quality of survival, integrity and development,
Add to Cart
Features:
▇ Specifications
| Climatic Category | 40/105/21 |
| Operating Temperation Range | -40 ℃ ～ 105℃ ( +85℃ to +105℃; decreasing factor 1.25% per ℃ for vR (dc)) |
| Ratde Voltage | DC 100V ,250V,400V,630V |
| Capacitance Range | 0.01µF～10 µF |
| Capacitance Tolerance | ±5% (J), ±10%(k) |
| Voltage Proot | 1.6UR (5s) |
| Dissipation Factor | ≤10x10-4 (1kHz, 20℃) |
| Insulation Resistance | ≥50000MΩ , CR≤0.33 µF ≥15000s, CR>0.33 µF (20℃ 100V 1min) |
| ① W: capacitor body width
② H: Capacitance height
③ T :Capacitance thickness
④ P:he distance between two CP lines
⑤ d: Diameter of CP line |  |
▇ Typical Applications
● Widely used in high frequency,DC ,AC and pulse circuits
● Providing optimun performance with small size in S-correction circuits for colour TV
● Specially designed for S-correction circuits of large screen monitor and colour TV
● Suitable for the situation where applies high frequency and high current pulse
Company Information
Our factory is an expert manufacturer of Film Capacitor which provides DC capacitors and AC capacitors. So far, our products have obtained UL, ENEC, CB, CQC, safety approval and company certification by ISO-9001:2008 quality assured firm.
We use efficient automatic equipment which ensures maximum consistency in your OEM orders to produce each capacitor. With 12 years of industrial experience, Don't hesitate to contact us
If you have any question, we always supply competitive price and good quality products.
Film capacitors, plastic film capacitors, film dielectric capacitors or polymer film capacitors, commonly known as film capacitors, power film capacitors, are electrical capacitors with insulating plastic film as the dielectric, sometimes carper des ro combined with ro
Depending on the required dielectric strength, the dielectric film is stretched to extremely thin thicknesses in a special process and then equipped with electrodes. The electrodes of film capacitors can be metallized aluminum or zinc coated directly on the surface of the plastic film, or a separate metal foil. Two of these conductive layers are wound into cylindrical windings, usually flattened to reduce mounting space requirements on printed circuit boards, or layered as multiple single layers stacked together to form the capacitor film capacitor body. , along with ceramic capacitors and electrolytic capacitors, are the most commonly used capacitor types in electronic equipment and are used in many AC and DC microelectronics and electronic circuits.